The 60cm wide control bar is hooked to a harness hook and is equipped with bar ends for width adjustment and comfortable winding of the 2x20m 200kg & 2x20m/260kg LIROS dyneema lines and line keepers for transport protection.
At the ends of the 4x dyneema lines are different knot sliders. This makes it easier to fix the kite and protect the kite bridles from potential hooking on the knot .
A lateral safety line with bungee (single front line safety) increases the safety factor so that the kite can blow out without pressure, over a linen splitter.
The color-different and ergonomically shaped EVA foam makes the bar grippy and shows the right and left side at the control bar.
An oval and polished stainless steel center hole of the bar minimizes the abrasion of the Dyneema depower line, which is fitted with adjuster and webbing handle + velcro tape and a twin stopperball. Observe the two to one rule, example: pull the twin stopper down 5cm, then pull the adjuster rope 10cm and clamp it. With the twin stopperball can the depower length easily adjusted for all kite sizes.
The control line length can be adjusted by means of a knot ladder between the control lines and the front lines of the bar, in order to protect them subsequently with a PU hose.
With the groundstake rings you have an effective solution to secure the kite on the ground.
The rotatable chickenloop AKA 2 with sleeve bearing is easy-going in its triggering and uncomplicated in the assembly and has an additional chickenstick for the harness hook.
Before use, check the ease of movement and clean after use if necessary.
